Rapid Deployment Surface Mount

The Rapid Deployable Surface Mount Bollards are the world’s first impact tested surface mount bollard range. Extremely fast and straightforward to install, providing PAS68 certified impact protection. Ground surfaces are unharmed as no bolts are required. It is simply the best temporary security solution available.


The Product

The Rapid Deployable Surface Mount Bollard System has been designed by our engineering department to a brief for a specific requirement. The original brief called for a system that could be pinned to the ground, and whilst it may have seemed the most obvious approach, our engineering department considered that this would significantly limit the usability in real world scenarios. This is because the integrity of the ground surface to be used may not be consistent, and authorities would most likely be reluctant to have surfaces damaged when a temporary solution is installed. Due to the unique way this bollard system is installed it provides PAS68 certified protection via the simple use of an anchor point at each end, negating the need to be bolted down. This means that you can easily and quickly deploy these bollards safe in the knowledge that you are not compromising on protection, and you are not damaging the pavement surface.

The Application

With rapid deployment capability for temporary events this bollard system offers a short to mid-term solution for almost any perimeter security brief. We are currently in the process of testing this system as a buried solution that would only require a surface depth of less than 75mm, easily transforming the short term solution into a more permanent one if required.

The Benefits

  • This bollard system has a Patent Pending.
  • Impact tested in accordance with BSI PAS 68:20 10
  • The bollards may be deployed (installed) at a rate of 1 bollard every 5 minutes
  • Temporary barrier with superb pedestrian permeability
  • The bollards may be temporarily removed to allow access to underground services
  • Full installation service or supply only
  • Matches static, lift-out, manually retractable, and shallow mount bollards
  • Manufactured in the UK
  • Proven innovative product and technology

Characteristics

Product Diameter Height Wall Thickness Finish
Rapid Deployable Surface Mount 203mm 1000mm Confidential Galvanised, RAL colour sleeve or stainless steel sleeve

Technical Specification


Testing Criteria Vehicle Weight Vehicle Speed
BSI PAS 68 : 2010 7500kg 48km/h (30mph)

Full PAS 68 Designation:

This product has a Patent Pending. 203mm Diameter on RAL or galvanised finish. 219mm Diameter on stainless steel finish or RAL colour (sleeve).