Stealth High Security Bollard

ATG Access has designed an automatic, high security bollard with integral hydraulics which can be installed as a new installation or be retrofitted into an existing, impact tested bollard foundation. This was the first British product to be officially tested at MIRA under the IWA, international impact test standard 2014.

Retrofit high security products are needed when historic installations become increasingly difficult for the owner to service and keep operational. To replace entire systems with new products normally involves the costly and disruptive removal of huge reinforced foundation structures. The ability to treat existing, installed outer casings with corrosion protection and then retrofit a new, certified security solution is unique.

AUTOMATIC BOLLARD

The Stealth Bollard system has been designed with reliability and serviceability in mind. The bollard can be part of a large, secure access control scheme or operated as a standalone system.
Able to cope with a high number of operations per hour, this product is ideal for sites requiring maximum security and with a high traffic flow.
Tested twice as a single and double bollard configuration, both tests used a 7,200 kg N2a type vehicle travelling at 80 kph (50 mph). Both impact tests produced fantastic results with the bollards being fully operational after impact.

Finishes available
Galvanised as standard with two yellow reflective bands. Can be painted to any specified RAL colour
Foundation Depth
1506mm
Height
996mm
Diameter
230mm
Operation
Integral hydraulics
Security Raiting
Single, IWA 14: V/7200[N2A]/80/90:2.4 Double, IWA 14: V/7200[N2A]/80/90:0.8/10.4